|
IW12 Impact Wrench
The Stanley IW12 Impact Wrench produces up to 1200
foot pounds (1632 Nm) of impact torque. The IW12 is used for nut, bolt and anchor bolt driving and is equally popular for
wood boring and drilling. Stanley IW12 features are:
• 4-12 gpm (15-45 lpm) operating range.
• Adjustable impact intensity.
• Lever-type forward/reverse spool.
•
Integral HYREVZ™ gear-type motor.
• Large trigger for gloved operation.
• Swing hammer mechanism.
CS-11 PDF File
CS11 Underwater Chain Saw
The Stanley CS11 Underwater Chain Saw is the
choice for extreme duty use. Stanley CS11 features are:
• 10-14 gpm (38-53 lpm) operating range.
• 24, 30, and 36 inch bar sizes.
•
Hand guard.
• HYREVZ™ gear-type motor.
• Safety trigger.
• Manual oiler.
CO 23 PDF File
CO23 Cut-Off Saw
The Stanley CO23 Cut-Off Saw was designed for underwater
use but it is also a very useful tool on land as well. The CO23 uses standard 10 inch (25.4 cm) diameter abrasive or wet or
dry diamond blades for cutting metals or concrete. Stanley CO23 features are:
• 10-15 gpm (38-57 lpm) operating
range.
• Adjustable depth shoe
plate.
• 3 inch (76.2 mm) deep maximum cut.
• Wheel guard.
• Integral HYREVZ™ gear-type motor.
•
Safety trigger.
 TP03 &TP08 Trash Pumps
TP03 pump discharges an impressive 450 gallons per minute (1688 lpm) and can
handle up to 3 inch (76 mm) diameter solids.
TP08 discharges 800 gpm (3028 lpm) and can handle up to 4 inch (102 mm) solids.
Stanley trash pump features are:
• 7-9 gpm (26-34 lpm) operating range.
• Urethane (TP03) and cast iron (TP08) impeller.
• Submersible
(no priming required)
• Able to run dry without damage.
• Urethane (TP03) and steel (TP08) bowl.
•
Lifting eye and carrying handle.
• HTMA quic disconnet
couplers.
• 3 inch (TP03) and 4 inch (TP08) discharge.
• Wingnuts for easy bowl removal and cleaning.
|
